5 Common Water Softener Repair Issues, And How To Avoid Them!

It’s always a bummer when something as technologically advanced as a water softener needs to be repaired, but water softener repair issues are actually a lot more common than most people would probably assume.

But the good news is that there are plenty of Perth Northern Suburbs plumbers around that will help you when it comes to making plumbing adjustments for these types of appliances. Furthermore, this is a plumbing repair job that you’ll surely want to get fixed quickly in order to sustain the integrity of your home’s water supply!

So the following are five of the most common water softener repair issues, and how you can avoid them:

1.      Water Inside The Salt Talk

It’s likely that the most common water softener issue is when the unit’s salt tank becomes full of water, and this type of problem will typically develop through clogging or overflows. But it’s also important to note that this type of water softener issue can result from a whole variety of different factors.

For instance, this type of issue can develop simply because your water softener is too old. Water softeners usually last around eight years and then begin to degrade, so you may need to inspect your unit for any signs of wear and tear, as well as cracks.

It’s also possible that you could be experiencing a broken water entry valve, or that your float valve has been set too high. So you may need to replace your water entry valve and lower the float valve to resolve this type of water softener malfunctioning.

2.      Problems With The Unit’s Salt Bridges

Although water softeners are intended to help households when it comes to reducing mineral scaling within your water fixtures, the water softener tank itself can many times be subjected to salt scaling. This type of salt buildup can potentially result in what’s called salt bridges that form at the bottom of the tank and prevent the water softener from functioning at an optimal performance.

A salt bridge is technically a really hard crust of salt found within the tank that prevents adequate water flow and halts the unit’s regeneration cycles. What’s really bad about salt bridges is that they can actually end up ruining a water softener if they aren’t recognized quickly enough.

But the good news is that this water softener issue is pretty simple to fix, and it’s simply a good idea to consistently check up on your water softener tank and clean out any excess salt buildup.

3.      Your Water Is A Brownish Color

No one likes to see a brown color come out of their home’s water fixtures, and this type of moment is always pretty scary. A lot of people who own a water softener and experience this type of issue may be wondering if the water softener unit is the culprit behind this type of water discoloration.

And the truth is that a water softener can sometimes result in brown water. This type of water discoloration is typically derived from old plumbing or extremely dirty water supplies; however, it’s still possible that bacteria accumulation within your water softener may be developing the nasty brown water.

This is why you should always sterilize your water softener system on a regular basis with hydrogen peroxide and chlorine. This process is really simple, but if you still see issues after thoroughly cleaning your unit then you should definitely reach out to your local plumbing team and have the pros inspect the unit for you.

4.      Your Water Softener Isn’t Adequately Using Salt

There are many scenarios in which a water softener’s salt levels remain the same within the brine tank, and this is a clear warning sign that the unit isn’t properly utilizing salt. This is a pretty serious issue because if your water softener isn’t using any salt, then it’s not developing the proper ion exchanges to actually soften your home’s water supply.

One of the most common culprits for this type of water softener repair is salt bridge formation, because these bridges can make it much more difficult for the salt within the unit to properly dissolve.

So sometimes you simply just need to fix any salt bridge accumulation within your tank, but if that doesn’t work then you may need to reach out to your plumber or the manufacturer for other types of troubleshooting expertise.

5.      Water Softener Is Not Softening Water Supply

This is probably the most frustrating type of water softener repair need, because we all expect water softeners to fulfill their ultimate purpose in actually softening a household’s water supply. One of the main reasons why your water softener may not be softening properly is due to salt buildup within the brine tank, but there are other common reasons as well.

It’s possible that your system bypass switch has inadvertently been shut off, and this would then result in water not going through the water softener at all. It’s also possible that your home’s water usage and overall demand is too much for your unit, which could lead to the unit’s resin beads not regenerating properly in between cycles.

In order to resolve this type of problem, you’re of course going to need to hone in on the cause of the issue. This can be a lot easier said than done, which is why most water softener repairs aren’t DIY jobs and are best left in the hands of professionals!

Reach Out To Plumbing Specialists To Learn More About How A Water Softener Repair Can Support Your Home’s Water Supply!

It’s always annoying to need to worry about water softener repair at your house, but these issues should never be neglected because time can only make matters much worse.

So reach out to the plumbing experts at Beehive Plumbing via the link at the top of the article to learn more about what to do when you need a water softener repair!